People are incredibly concerned about the security of their homes; hence, they are ever looking for perfect and secure locks for their doors. When you lose or misplace your keys, it would be best to look for a professional locksmith to help ensure that you open your door faster and safely.
For removing the Deadbolt lock without a key, you get multiple options. So It depends on your present situation. If you are stuck inside of house, using bobby pins is the best option. Bring two pins and insert the one at the bottom of the lock. Now insert the second pin towards the top of the lock. After That, rotate the bottom hook and move the top pin accordingly. It will force the bolt to unlock.
Pick the Lock Using Bobby Pins
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth. This motion should set the pins and cause the deadbolt to unlock. If this doesn't happen within a couple of minutes, you should remove the first bobby pin and reinsert it before trying further.
If you do not have bobby pins on hand, you can use any small, thin piece of metal. You could try using a heavy duty paper clip, for example.
How to Open a Deadbolt Lock With a Drill
Drilling a deadbolt lock should only be done as a last resort during an emergency. Before you begin drilling, you should understand that the drill will destroy the lock’s internal components, and it will be unusable. You will have to replace the lock and other door parts after the drilling act is complete.
If someone requires immediate assistance or is in danger, drilling might be your best option. Follow this procedure to open a deadbolt lock with a drill:
Place a drill bit into the tip of a power drill and tighten the power drill’s tip.
Cover the drill bit with lubricant by spraying a considerable amount of lubricant on it.
Spray the lubricant around the outer edge of the keyhole and inside the deadbolt. Once done, place the drill bit’s tip onto the center of the keyhole.
Pull the power drill’s trigger to spin the drill bit.
Apply gentle pressure on the drill to force the drill bit into the keyhole. Apply lubricant as soon as the drill bit infiltrates the keyhole. The lubricant will prevent friction from breaking the drill bit. Repeat this procedure until the drill bit breaks via the lock’s rear, and all tumbler pins fall.
Stick a screwdriver into the keyhole and turn the lock to unlock it as soon as you finish drilling the deadbolt.
How to open a Deadbolt Lock With A Credit Card?
It is hard for anyone to open the door in the first attempt. So below is the step-by-step guide.
Bring a credit card or non-valuable plastic swipe boards like membership cards.
It is more helpful if the card is laminated. Indeed, this type of swipe board tends to be solid and flexible enough.
Ensure the plastic card is long enough to touch the deadbolt’s latch.
Now insert the card side by side towards the door’s gap. In this part, your deadbolt latch is located that locks the door.
Now shake and push the card to the keyhole while attaching the card tip with the latch.
Bend the credit card far from the deadbolt to open the latch.
Remember, this technique is only applicable to springing deadbolt locks with standard door knobs.
If you are a lock pick pro and are seeking high-quality car lock picking tools, you have come to the right place! Place your order for one of our car lock picking tools or lock picking set featured on barhomevip.com and find out what you have been missing all along!